The Vanderbilt collection is an elegantly framed medicine cabinet and mirror. With Baroque, Decor and Royale styles each piece is fit for sophistication and durability. The three mirror design accompanied by the three year warranty is sure to have you covered.
Features:
- Vanderbilt collection
- 42" Triple door medicine cabinet
- Available in 3 styles & 3 finishes
- Surface mount
- Wood frame with finished corner
- Recessed, cabinet frame completely flush to the wall
- 0.375" glass shelves
- Gray satin anodized aluminum construction
- 3 mirror design (front bevel mirror, mirror behind door and inside mirror back)
- Three year warranty
- Overall Dimensions: 34" H x 42" W
Options
- Optional 3x magnifying mirror available
- Optional mirrored sides with surface mounting hardware available for surface mounting
Care
- For care use a mild cleanser, applied first to a rag or paper towel
- Do not spray cleaner directly onto the mirror or frame
Installation Instructions:
- For protection during shipping glass shelves are placed inside cabinet body
- They are label marked "GLASS SHELVES" , please remove before installation
- Shelf pins are inside the cabinet in an envelope marked "SHELF PINS", remove before installation
- Cabinet body must be level and plumb upon installation
- Use a leveling instrument to ensure accuracy, or door may not close and/or secure itself properly
- When recessing, use the two pre-drilled holes (top and bottom) on each side of
the cabinet interior
- Screws are not supplied
Surface Mounting Instructions
- Determine the location of the cabinet on your wall
- Draw a level horizontal line on wall at desired height for top back edge of cabinet
- Line up long thin aluminum strip (holes on the bottom) with horizontal line
- Secure strip with screws (not included). Strip must be well secured
- Insert 2 surface mount hooks (with NO holes) into back slot in the middle on the TOP of cabinet
- Slide one to each extreme (left side and right side)
- Repeat previous step with 2 surface mount hooks (WITH holes) on bottom of cabinet
- Pick up cabinet and hook the 2 Top surface mount hooks into the thin aluminum strip already mounted to the wall
- Secure the 2 Bottom surface mount hooks into the wall with screws (not included)
- Each hook must be to the extreme left and right, and properly secured
- PARTS INCLUDED:
1 Thin aluminum strip with multiple holes
2 Top surface mount hooks - with no holes
2 Bottom surface mount hooks - with holes
NOTE: If you are mounting the mirrored sides, peel off double-sided tape, align the wood strip to the back of the cabinet - making sure front is flush - and press firmly.
For more information on this product please view the specification sheet seen below.
Specification Sheet
We Now Ship to Canada!
Ships to Canada
